ABSTRACT
PURPOSE@#Accuracy of image matching between resting and smiling facial models is affected by the stability of the reference surfaces. This study aimed to investigate the morphometric variations in subdivided facial units during resting, posed and spontaneous smiling. @*MATERIALS AND METHODS@#The posed and spontaneous smiling faces of 33 adults were digitized and registered to the resting faces. The morphological changes of subdivided facial units at the forehead (upper and lower central, upper and lower lateral, and temple), nasal (dorsum, tip, lateral wall, and alar lobules), and chin (central and lateral) regions were assessed by measuring the 3D mesh deviations between the smiling and resting facial models. The one-way analysis of variance, Duncan post hoc tests, and Student’s t-test were used to determine the differences among the groups (α = .05). @*RESULTS@#The smallest morphometric changes were observed at the upper and central forehead and nasal dorsum; meanwhile, the largest deviation was found at the nasal alar lobules in both the posed and spontaneous smiles (P < .001). The spontaneous smile generally resulted in larger facial unit changes than the posed smile, and significant difference was observed at the alar lobules, central chin, and lateral chin units (P < .001). @*CONCLUSION@#The upper and central forehead and nasal dorsum are reliable areas for image matching between resting and smiling 3D facial images. The central chin area can be considered an additional reference area for posed smiles; however, special cautions should be taken when selecting this area as references for spontaneous smiles.
ABSTRACT
PURPOSE@#. This study investigated the accuracy of full-arch intraoral scans obtained by various scan strategies with the segmental scan and merge methods. @*MATERIALS AND METHODS@#. Seventy intraoral scans (seven scans per group) were performed using 10 scan strategies that differed in the segmental scan (1, 2, or 3 segments) and the scanning motion (straight, zigzag, or combined). The three-dimensional (3D) geometric accuracy of scan images was evaluated by comparison with a reference image in an image analysis software program, in terms of the arch shape discrepancies. Measurement parameters were the intermolar distance, interpremolar distance, anteroposterior distance, and global surface deviation. One-way analysis of variance and Tukey honestly significance difference post hoc tests were carried out to compare differences among the scan strategy groups (α = .05). @*RESULTS@#. The linear discrepancy values of intraoral scans were not different among scan strategies performed with the single scan and segmental scan methods. In general, differences in the scan motion did not show different accuracies, except for the intermolar distance measured under the scan conditions of a 3-segmental scan and zigzag motion. The global surface deviations were not different among all scan strategies. @*CONCLUSION@#. The segmental scan and merge methods using two scan parts appear to be reliable as an alternative to the single scan method for full-arch intraoral scans. When three segmental scans are involved, the accuracy of complete arch scan can be negatively affected.
ABSTRACT
Although gag reflex is an essential function and a useful physiological defense mechanism, it can become an obstacle in a dental treatment. In this case, a questionnaire was designed and used in consultations to objectify the factors associated with gag reflex. Based on the questionnaire, various treatment protocols were planned, such as behavioral control, which is a systematic desensitization that adapts by placing dental instruments in the oral cavity, and habit control to eliminate vomiting habits after drinking. Except for the placement of the implant fixture under general anesthesia, all restoration procedures were performed in the outpatient clinic in the same manner as the conventional implant fixed prosthetic restoration. The systematic desensitization and behavior technique were repeated until the patient was able to endure discomfort and relieve gag reflex in dental treatment. The patient was successfully received the implant-fixed prosthetic restoration in the partial edentulous region.
ABSTRACT
Purpose@#The purpose of this study is to investigate the stress response and sleep state of the new patients who visit the hospital for prosthodontic treatment due to tooth loss to make reference to further treatment direction. @*Materials and methods@#Examinations, consultations, and surveys were conducted on 236 patients (94 males, 142 females, and 24-86 years old), who newly registered at the department of prosthodontics at Pusan national university hospital, for 2 years from 2018. The number of remaining teeth, edentulous arch, possibility of mastication, and future prosthetic treatment directions were recorded. The visual analogue scale (VAS), stress response inventory (SRI) and Insomnia severity index (ISI) were used as tools to measure patient’s subjective discomfort, stress response, and sleep status. @*Results@#Among the entire prosthodontic patient group, the average value of ‘fatigue’ was significantly higher among the 7 items of SRI, and the value of ‘aggression’ was significantly lower (P<.001). There are a significant difference between the edentulous and full dentition in the oral discomfort value measured by VAS (P=.004). In cases where less than 20 teeth remain, mastication is impossible, and patients who are planning treatment with removable prostheses, VAS value and ‘depression’ and ‘fatigue’ values in SRI were higher than those in the reverse case (P<.05).The patients showed severe level in VAS value have high value of ‘tension’, ‘somatization’, ‘depression’, ‘fatigue’and ‘frustration’in SRI than non-serious patients (P<.05). Clinical insomnia occurred in 11.4% of all patients, and women had significantly lower sleep quality than men (P=.044). Patients with insomnia showed significantly higher scores on the VAS value and all 7 SRI items than those of normal sleepers (P<.05). @*Conclusion@#The new prosthetics had high ‘fatigue’ value among the 7 items of SRI. The oral condition, number of residual teeth and mastication function and clinical insomnia affected oral discomfort and the stress response.
ABSTRACT
Calcium hydroxide has been widely used for root canal dressing material in endodontic treatment. This report describes that when the accurate diagnosis and proper nonsurgical endodontic retreatment is applied to periapical lesion with accidentally extruded calcium hydroxide paste, the lesion can be successfully treated. Overfilled calcium hydroxide can affect the healing process, so the overextension of calcium hydroxide agent should be avoided.
ABSTRACT
Although gag reflex is an essential function and a useful physiological defense mechanism, it can become an obstacle in a dental treatment. In this case, a questionnaire was designed and used in consultations to objectify the factors associated with gag reflex. Based on the questionnaire, various treatment protocols were planned, such as behavioral control, which is a systematic desensitization that adapts by placing dental instruments in the oral cavity, and habit control to eliminate vomiting habits after drinking. Except for the placement of the implant fixture under general anesthesia, all restoration procedures were performed in the outpatient clinic in the same manner as the conventional implant fixed prosthetic restoration. The systematic desensitization and behavior technique were repeated until the patient was able to endure discomfort and relieve gag reflex in dental treatment. The patient was successfully received the implant-fixed prosthetic restoration in the partial edentulous region.
ABSTRACT
Purpose@#The purpose of this study is to investigate the stress response and sleep state of the new patients who visit the hospital for prosthodontic treatment due to tooth loss to make reference to further treatment direction. @*Materials and methods@#Examinations, consultations, and surveys were conducted on 236 patients (94 males, 142 females, and 24-86 years old), who newly registered at the department of prosthodontics at Pusan national university hospital, for 2 years from 2018. The number of remaining teeth, edentulous arch, possibility of mastication, and future prosthetic treatment directions were recorded. The visual analogue scale (VAS), stress response inventory (SRI) and Insomnia severity index (ISI) were used as tools to measure patient’s subjective discomfort, stress response, and sleep status. @*Results@#Among the entire prosthodontic patient group, the average value of ‘fatigue’ was significantly higher among the 7 items of SRI, and the value of ‘aggression’ was significantly lower (P<.001). There are a significant difference between the edentulous and full dentition in the oral discomfort value measured by VAS (P=.004). In cases where less than 20 teeth remain, mastication is impossible, and patients who are planning treatment with removable prostheses, VAS value and ‘depression’ and ‘fatigue’ values in SRI were higher than those in the reverse case (P<.05).The patients showed severe level in VAS value have high value of ‘tension’, ‘somatization’, ‘depression’, ‘fatigue’and ‘frustration’in SRI than non-serious patients (P<.05). Clinical insomnia occurred in 11.4% of all patients, and women had significantly lower sleep quality than men (P=.044). Patients with insomnia showed significantly higher scores on the VAS value and all 7 SRI items than those of normal sleepers (P<.05). @*Conclusion@#The new prosthetics had high ‘fatigue’ value among the 7 items of SRI. The oral condition, number of residual teeth and mastication function and clinical insomnia affected oral discomfort and the stress response.
ABSTRACT
To restore a tooth with a fracture line extending below the marginal bone level, a surgical crown lengthening procedure accompanied by ostectomy could be considered to expose the fracture line and reestablish the biologic width. However, this procedure could lead to esthetic failure, especially in the anterior teeth. Therefore, orthodontic extrusion, which elevates the fracture line from within the alveolar socket without sacrificing the supporting bone and gingiva, is recommended. This technique allows for the proper placement of the crown on a sound tooth structure, with the reestablishment of the biologic width.Alternatively, surgical extrusion is an one-step procedure that is simpler and less time-consuming than orthodontic extrusion; placing and adjusting the orthodontic appliance does not require multiple visits. This study presents successful restoration in 2 cases with a crown-tooth root fracture of the maxillary central incisor treated using a multidisciplinary approach through orthodontic extrusion or surgical extrusion followed by successful restoration.
ABSTRACT
To restore a tooth with a fracture line extending below the marginal bone level, a surgical crown lengthening procedure accompanied by ostectomy could be considered to expose the fracture line and reestablish the biologic width. However, this procedure could lead to esthetic failure, especially in the anterior teeth. Therefore, orthodontic extrusion, which elevates the fracture line from within the alveolar socket without sacrificing the supporting bone and gingiva, is recommended. This technique allows for the proper placement of the crown on a sound tooth structure, with the reestablishment of the biologic width.Alternatively, surgical extrusion is an one-step procedure that is simpler and less time-consuming than orthodontic extrusion; placing and adjusting the orthodontic appliance does not require multiple visits. This study presents successful restoration in 2 cases with a crown-tooth root fracture of the maxillary central incisor treated using a multidisciplinary approach through orthodontic extrusion or surgical extrusion followed by successful restoration.
ABSTRACT
Crown fractures are the most frequent traumatic injuries to permanent teeth and mainly involve the maxillary incisors due to their exposed position in the dental arch. One option for managing crown fractures, when the tooth fragment is present and in good condition, is reattachment of the fragment to its original position. This paper reports on three crown fracture cases in which successful esthetic and functional results were achieved by reattachment of the tooth fragment.
Subject(s)
Crowns , Dental Arch , Incisor , ToothABSTRACT
In the case of edentulous patients, the total amount of occlusal force is dispersed by the keratinized gingiva during mastication, in result, causing lower masticatory and chewing efficiency. In particular, the mandibular area has more side effects such as pain than the maxilla has. It gets worse when the patient has more absorption of alveolar bone, but the implant treatment is often interrupted due to the existence of the inferior alveolar nerve. In this case, a patient treated with the all-on-4 method by placing the implant in the anterior part of mandible and with the conventional complete denture for the maxilla has maintained without complications and was satisfied with the restoration both functionally and esthetically.
Subject(s)
Humans , Absorption , Bite Force , Denture, Complete , Gingiva , Mandible , Mandibular Nerve , Mastication , Maxilla , MethodsABSTRACT
When inflammatory products are found in both periodontal and pulpal tissues simultaneously, a periodontal-endodontic combined lesion is established. The treatment of periodontal-endodontic combined lesions includes root canal therapy and periodontal regenerative procedure for resolution of both the apical and marginal inflammatory lesions. The present study reports the treatment of periodontal-endodontic combined lesions in the mandibular anterior area with root canal therapy, followed by guided tissue regeneration therapy. Teeth with severe bone destruction in each case could be preserved, without extraction, over a 3-year period. Therefore, it appears that treatment of periodontal-endodontic combined lesions in the mandibular anterior area using guided tissue regeneration technique after root canal therapy may provide clinical advantages.
Subject(s)
Dental Pulp Cavity , Guided Tissue Regeneration , Periodontitis , Root Canal Therapy , ToothABSTRACT
There are several unfavorable conditions regarding alveolar bone condition that may compromise the denture patient's satisfaction. Chewing efficiency may not be satisfactory when alveolar bone is deficient, and the denture stability could hardly be achieved when alveolar bone shape is irregular. Implant overdenture can be useful to provide satisfactory denture experience compared to conventional denture. The attachment for implant overdenture can be classified into bar attachment and solitary attachment. When the positions of the implants are in the mandibular anterior region, bar attachment may be favorable to obtain a rigid support of the entire denture. When implants are distributed both on anterior and posterior region, a solitary attachment could be considered for ease of removal and maintenance. This report presents implant overdenture cases with the patients that had unilateral mandibular alveolar bone atrophy conditions. Different abutments were chosen based on the individual patient's mandibular alveolar bone condition and the treatments were successful in terms of patient satisfaction.
Subject(s)
Humans , Alveolar Bone Loss , Atrophy , Denture Retention , Denture, Overlay , Dentures , Mandible , Mastication , Patient SatisfactionABSTRACT
The teeth are the hardest structures in the body and can be a biomarker of aging. The aging process and degenerative changes in the teeth are helpful for estimation of age in adults. One of the best-known features of dental aging is a reduction in the size of the pulp chamber as a result of secondary deposition of dentin. In this study, we developed new regression models to estimate chronological age in Korean adults using the mandibular first molars to examine the relationship between age and pulp cavity size on intraoral radiographs. Intraoral periapical digital radiographs of the mandibular first molars were collected from 243 patients (147 male, 96 female) of known age. The radiographic images were analyzed by using the Adobe Photoshop CS5 image editing program. The pulp chamber height ratio (PCHR), pulp chamber width ratio (PCWR) were calculated and found to have a significant negative correlation with age. The correlation was consistently higher for PCHR than for PCWR. The strongest correlation was found for PCHR in female patients (r=−0.824). Multiple regression models were derived using the PCHR and PCWR. The determination coefficients (R²) of the models ranged from 0.660 to 0.730. Our results indicate that the measurement of pulp chamber height and width in the mandibular first molar is a practical, simple and reliable method for estimation of age in Korean adults.
ABSTRACT
The teeth are the hardest structures in the body and can be a biomarker of aging. The aging process and degenerative changes in the teeth are helpful for estimation of age in adults. One of the best-known features of dental aging is a reduction in the size of the pulp chamber as a result of secondary deposition of dentin. In this study, we developed new regression models to estimate chronological age in Korean adults using the mandibular first molars to examine the relationship between age and pulp cavity size on intraoral radiographs. Intraoral periapical digital radiographs of the mandibular first molars were collected from 243 patients (147 male, 96 female) of known age. The radiographic images were analyzed by using the Adobe Photoshop CS5 image editing program. The pulp chamber height ratio (PCHR), pulp chamber width ratio (PCWR) were calculated and found to have a significant negative correlation with age. The correlation was consistently higher for PCHR than for PCWR. The strongest correlation was found for PCHR in female patients (r=−0.824). Multiple regression models were derived using the PCHR and PCWR. The determination coefficients (R²) of the models ranged from 0.660 to 0.730. Our results indicate that the measurement of pulp chamber height and width in the mandibular first molar is a practical, simple and reliable method for estimation of age in Korean adults.
Subject(s)
Adult , Female , Humans , Male , Age Determination by Teeth , Aging , Dental Pulp Cavity , Dentin , Korea , Methods , Molar , Radiography , ToothABSTRACT
The olfactory system can detect many odorants with high sensitivity and selectivity based on the expression of nearly a thousand types of olfactory receptors (ORs) in olfactory receptor neurons (ORNs). These ORs have a dynamic odorant detection range and contribute to signal encoding processes in the olfactory bulb (OB). To harness the capabilities of the olfactory system and develop a biomimetic sensor, stable culture and maintenance of ORNs are required. However, in vitro monolayer culture models have several key limitations: i) short available period of cultured neurons, ii) low cultural efficiency, and iii) long-term storage challenges. This study aims to develop a technique: i) to support the spheroid culture of primary ORN precursors facilitating stable maintenance and long-term storage, and ii) to demonstrate the viability of ORN spheroid culture in developing an olfactory system mimetic bioelectronic nose. Recombinant protein (REP; TGPG[VGRGD(VGVPG)₆]₂₀WPC) was used to form the ORN spheroids. Spheroid formation enabled preservation of primary cultured ORNs without a significant decrease in viability or the expression of stemness markers for ten days. Physiological characteristics of the ORNs were verified by monitoring intracellular calcium concentration upon odorant mixture stimulation; response upon odorant stimulation were observed at least for ten days in these cultivated ORNs differentiated from spheroids. Coupling ORNs with multi electrode array (MEA) enabled the detection and discrimination of odorants by analyzing the electrical signal patterns generated following odorant stimulation. Taken together, the ORN spheroid culture process is a promising technique for the development of a bioelectronic nose and high-throughput odorant screening device.
Subject(s)
Biomimetics , Calcium , Discrimination, Psychological , Electrodes , In Vitro Techniques , Mass Screening , Neurons , Nose , Odorants , Olfactory Bulb , Olfactory Receptor NeuronsABSTRACT
Anterior diastemas are common esthetic problems. One of the challenges in clinical esthetic dentistry is closing anterior diastemas without creating “black triangles” between the teeth. The success of a restorative treatment in anterior teeth depends on the esthetic integration between soft tissues and hard tissues. This report describes the successfully accomplished diastema closure case by producing the emergence profile with natural contours at the gingival-tooth interface and then generating of gingival recontouring process.
Subject(s)
Dentistry , Diastema , ToothABSTRACT
Anticonvulsants, calcium channel blockers and immunosuppressants are representative drugs related with gingival enlargement. Clinical signs and symptoms caused by drug-induced gingival enlargment frequently appear within 1 to 3 months after medication. At initial stage, it is limited to attached gingiva but may extend coronally and interfere with esthetics, mastication and speech. Interproximal spaces are common beginning area and pathologic teeth migration could be occurred by the lesion. Withdrawal or substitution of medication would be the most effective treatment of drug-induced gingival enlargement. However, periodontal treatment and further supportive periodontal therapy should be provided where change in medication is impossible. The present study reports the cases which show the resolution of inflammation with spontaneous teeth migration without change in medication. In all cases discussed in this report could be efficiently managed with proper periodontal treatment and further supportive periodontal therapy.
Subject(s)
Humans , Anticonvulsants , Calcium Channel Blockers , Esthetics , Gingiva , Gingival Overgrowth , Immunosuppressive Agents , Inflammation , Mastication , Periodontal Diseases , ToothABSTRACT
PURPOSE: The purpose of this study was to determine fracture resistance and failure modes of three-unit fixed dental prostheses (FDPs) made of lithium disilicate pressed on zirconia (LZ), monolithic lithium disilicate (ML), and monolithic zirconia (MZ). MATERIALS AND METHODS: Co-Cr alloy three-unit metal FDPs model with maxillary first premolar and first molar abutments was fabricated. Three different FDPs groups, LZ, ML, and MZ, were prepared (n = 5 per group). The three-unit FDPs designs were identical for all specimens and cemented with resin cement on the prepared metal model. The region of pontic in FDPs was given 50,000 times of cyclic preloading at 2 Hz via dental chewing simulator and received a static load until fracture with universal testing machine fixed at 10°. The fracture resistance and mode of failure were recorded. Statistical analyses were performed using the Kruskal-Wallis test and Mann-Whitney U test with Bonferroni's correction (α=0.05/3=0.017). RESULTS: A significant difference in fracture resistance was found between LZ (4943.87 ± 1243.70 N) and ML (2872.61 ± 658.78 N) groups, as well as between ML and MZ (4948.02 ± 974.51 N) groups (P.05). With regard to fracture pattern, there were three cases of veneer chipping and two interfacial fractures in LZ group, and complete fracture was observed in all the specimens of ML and MZ groups. CONCLUSION: Compared to monolithic lithium disilicate FDPs, monolithic zirconia FDPs and lithium disilicate glass ceramics pressed on zirconia-based FDPs showed superior fracture resistance while they manifested comparable fracture resistances.
Subject(s)
Alloys , Bicuspid , Ceramics , Dental Prosthesis , Denture, Partial, Fixed , Glass , In Vitro Techniques , Lithium , Mastication , Molar , Resin CementsABSTRACT
Age estimation is important in the practice of forensic science to establish the identity of human remains, as well as with living persons. Particularly in Korea, age estimation in adults has been increase in the demand for incorrect birth records in order to be entitled to civil liability, social benefits, employment. The reduction of pulp cavity size as a result of secondary dentin deposit with increasing age could be used to estimate age. This regressive change can be analyzed using radiological techniques; thus, a variety of methods for dental age estimation based on this approach have been proposed. The purpose of this study is to evaluate the concurrence between the Drusini's method and the Jeon's method using the mandibular first molar on orthopantomographs (OPGs) in Korean adults. A total of 232 OPGs (91 females and 141 males) of Korean individuals with ages ranging from 20 to 69 years were analyzed using Drusini's method and Jeon's method. Our results revealed that the correlation of the two methods with age was statistically significant (r=0.501). Both Drusini's method and Jeon's method showed significant correlation with chronological age, and Jeon's method showed a greater correlation with chronological age (r=0.738) than Drusini's method (r=0.586). The mean absolute error was 7.99 years for Jeon's method and 9.79 years for Drusini's method. Our results demonstrate that Jeon's method using the mandibular first molar on OPGs is a practical and suitable method for age estimation in Korean adults.